Linux Server and Workstation Configuration How To

1. IPv6 Configuration on FreeBSD

Tags: [IPv4 tunnel, IPv6, FreeBSD]  ...

2. FreeBSD 8.1

Tags: [FreeBSD 8.1]  ...

3. Released FreeBSD 8.1

Tags: [FreeBSD 8.1, UNIX]  ...

4. How to mount iso-image of the CD drive in FreeBSD

Tags: [How to, mount, iso-image, FreeBSD]  ...

5. Combining two network interfaces under FreeBSD 5.x

Tags: [network interface, FreeBSD]  ...

6. How to boot into single user mode (single mode)

Tags: [single user mode, linux, FreeBSD, Solaris, UnixWare]  ...

7. Creating IP-IP tunnel between FreeBSD and Linux

Tags: [IP-IP tunnel, FreeBSD, Linux]  ...

8. Transferring a FreeBSD on new hard drive

Tags: [Transfer, FreeBSD, hard drive]  ...

9. Installing software through Ports on FreeBSD

Tags: [Ports, FreeBSD]  ...

10. How to connect USB Flash drive in FreeBSD

Tags: [USB Flash drive, FreeBSD]  ...

11. Add or remove alias for a network interface in FreeBSD

Tags: [alias, FreeBSD]  ...

12. Internet gateway on FreeBSD

Tags: [freebsd, route, ipfw, nat, squid, proxy]  ...

13. HowTo setting up NFS server and client on FreeBSD and Linux

Tags: [NFS, FreeBSD, Linux]  ...

14. ipfw nat on FreeBSD 7

Tags: [ipfw, nat, FreeBSD, kernel, unix]  ...

15. free

Tags: [linux, unix, command, free]  ...

16. IPv6 Configuration on FreeBSD

... Client - Free IPv6 tunnel B-deps: R-deps: WWW: http://www.go6.net/ Install: cd /usr/ports/net/gateway6 make install clean Edit the configuration file /usr/local/etc/gw6c.conf userid ...

17. IPv6 Configuration on Ubuntu Linux

...  template=setup server=broker.freenet6.net <== address retry_delay=30 tunnel_mode=v6anyv4 if_tunnel_v6v4=sit1 if_tunnel_v6udpv4=tun proxy_client=no keepalive=yes keepalive_interval=30 syslog_facility=DAEMON ...

18. FreeBSD 8.1

Released FreeBSD 8.1 read more  ...

19. Released FreeBSD 8.1

Released FreeBSD 8.1. The release is available for architectures amd64, i386, ia64, pc98, powerpc and sparc64 5 mounting assemblies: bootonly, CD, DVD, LiveFS and Memstick for USB Flash. To perform a ...

20. How to mount iso-image of the CD drive in FreeBSD

In /boot/loader.conf add vn_load = "YES" or load by the hands kldload vn.ko mount: vnconfig /dev/vn0c /home/user/cdrom.iso mount -t cd9660 /dev/vn0c /mnt unmount: umount /mnt ...